James-loudspeaker 63SA-4 Bedienungsanleitung PDF herunterladen

63SA-4/63SA-7

Assemble the parts

11”

22.5”

The brackets (Part No.

SA-BRKT-11-22) are

designed for 16” On-

center constructions,

however can be adjusted

to accomodate

construction from 11” to

22.5” joist spacing

(Fig. 1).

Attach the brackets to the speaker using the

supplied 8/32 screws , lock washers & flat washers .

Tighten these screws just enough to allow movement for

adjustment during installation.

Note: brackets can be mounted

to either the sides or the ends of the speaker for added

installation flexibility.

Tools Required:

1) #2 Phillips screwdriver

or drill with #2 Phillips

drill bit

2) Straight edge or level

3) Wood or drywall screws

1 - 63SA-4/63SA-7

2 - Mounting Brackets

4 - 8-32 x 1/2 Pan Head

Machine Screws

4 - #8 Lock Washers

4 - #8 Flat Washers

4 - 6/32 Course Head Screws

1 - Foam Dust Guard

1 -Trim Ring

Spacer Ring(s)

Parts List: Supplied Parts: Supplied by Installer

4 - 1.25” Wood or drywall

screws

Parts: Ordered Separately

Fig. 3

Fig. 1

Installation guide for the 63SA-4/63SA-7 In-Ceiling Speaker.

Use optional spacer to adjust height

P/N SA63-SP-0.125

Attach the finishing trim kit

There are four trim ring kits

available to choose from

Fig. 17

Fig. 16

For omit spacer ring (a)

1/2” Drywall

For use spacer ring (b)

5/8” Drywall

If the drywall is in excess of 5/8”

add additional 1/8” spacer rings

as needed.

Fig. 18

Fig. 19

535 Airpark Road, Napa, CA 94558 | Ph: 707.265.6343 Fx: 707.265.6334 | www.jamesloudspeaker.com

SA63-3R-SR SA63-3S-SR SA63-3R-W SA63-3S-W

For Solid SurfacesFor Sheet Rock

Page 1

Fig. 2

Products suitable for use in

outdoor dry environments

63SA-7

Installation

Video

FREQ. RESPONSE

IMPEDANCE

SENSITIVITY

AMP RANGE

RMS POWER

38-22kHz +/-3dB

4 Ohms

85dB @ 2.83V/1M

25-50 Watts

40 Watts

Fig. 4

Fig. 15

*63SA-4 Sensitivity: 87dB @ 2.83V/1M

63SA-4/7-INSTALL 140616

Install foam dust guard

Drywall, tape, mud, etc.

Safely store the supplied grille for the final

assembly. If you also received the 63SAM-4

or 63SAM-7 module, store this as well.

Fig. 20

If you received a 63SAS-4 or 63SAS-7

preconstruction assembly, be sure to order

the 63SAM-4/63SAM-7 module when ready for

finishing.

Recommend testing sub to assure all components

are working.

1 2

63SA-4/63SA-7 1

Inhaltsverzeichnis

Seite 1 - 63SA-4/63SA-7

63SA-4/63SA-71Assemble the parts11”22.5”The brackets (Part No.SA-BRKT-11-22) aredesigned for 16” On-center constructions,however can be adjustedto acc

Seite 2

4Place the speaker on top of thethe temporary holders Page 35Expand the bracket to fit from joist to joist (Fig. 8). Then fix to the joists usinga dr

Verwandte Modelle: 63SA-7

Kommentare zu diesen Handbüchern

Keine Kommentare

James-loudspeaker 63SA-4 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Akustik James-loudspeaker 63SA-4 herunter. James Loudspeaker 63SA-4 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 63SA-7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik James-loudspeaker 63SA-4